User's Manual
Table Of Contents
- ROAMEO Family Wireless Intercom System
- •TR-1800 •AP-1800
- CHAPTER 1 Certification Information
- CHAPTER 2 Introduction
- CHAPTER 3 System Overview
- CHAPTER 4 Site Survey
- CHAPTER 5 Installation
- CHAPTER 6 Basic Operation
- CHAPTER 7 Beltpack Overview
- System Quick Start
- Button Operation – Common
- Menu Structure – Main Menu Access
- Aux Input Menu
- AUX DIM Menu
- Volume Limit Menu
- Headset Select Menu
- Mic Gain
- Sidetone
- Mic Noise Gate
- Hot Mic
- Talk/Listen LED Buttons
- Front Display Brightness
- Top Display Brightness
- LCD Timeout
- Call Tally Talk
- Screen Flip
- Master Talk Switch
- Low Battery Alert
- Call Waiting Alert
- DECT Connection Alert
- Matrix Connection Alert
- Dark Mode Boot Alert
- Key Clicks Alert
- Alerts Levels
- Key Assignments
- Icon Help
- Scroll List
- CHAPTER 8 Access Point Overview
- AP-1800 Front Panel Description
- IPedit Requirements
- IPedit Main Window
- Configuration
- Device Name Field
- Description Field
- Version Field
- IP Address Field
- Netmask Field
- Gateway Address Field
- DNS Server Field
- Domain Name Field
- MAC Address Field
- Use Static IP Settings Check Box
- Disable RSTP Check Box
- Type Field
- Status Field
- Sessions Field
- AP Channels Field
- BP Channels Field
- Sync Display Box
- System ID Field
- PIN Field
- Zone Drop Down Menu
- CODEC Drop Down Menu
- AP ID Number Field
- Sync Master Check Box
- Intercom Alpha Field
- Channel Description Field
- Destination Type Drop Down Menu
- Destination Device Name Field (OMNEO devices and AP-1800 ROAMEO Access Point Only)
- Destination IP Address Field
- Destination Description Field
- Destination Channel Drop Down Menu
- Destination Channel Description Field
- Receiver Latency Field
- DECT BPID
- DECT Zone Selection Field
- Configuration
- CHAPTER 9 Maintenance
- CHAPTER 10 Troubleshooting, Accessories and Replacements
ROAMEO System Basic Operation 87
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
Scroll Lists
Scroll Lists are groups of alphas of the same assignment types.
Scroll Lists are grouped by assignment types. For more information on assignment types, see “Key Assignment Types and
Descriptions” on page 73.
To access the scroll list, do the following:
1. On the front of the beltpack, press the Main Menu button.
The Main Menu appears in the beltpack display screen.
2. Using the arrow buttons, scroll to the Scroll List icon.
3. Press the Select button.
A list of assignment types appear on the beltpack display screen.
4. Using the arrow buttons, scroll to the assignment type desired.
5. Press the Select button.
A list of available assignments appear in the beltpack display screen.
Tally Flash
A Tally Flash occurs when a call is received by an assigned user. The top panel talk LED button and the front display alpha
start flashing. If the beltpack is set to the default, the tally flash lasts for 10 seconds before the tally times out.
For more information, see “Call Tally Talk” on page 106.