User's Manual
Table Of Contents
- ROAMEO Family Wireless Intercom System
- •TR-1800 •AP-1800
- CHAPTER 1 Certification Information
- CHAPTER 2 Introduction
- CHAPTER 3 System Overview
- CHAPTER 4 Site Survey
- CHAPTER 5 Installation
- CHAPTER 6 Basic Operation
- CHAPTER 7 Beltpack Overview
- System Quick Start
- Button Operation – Common
- Menu Structure – Main Menu Access
- Aux Input Menu
- AUX DIM Menu
- Volume Limit Menu
- Headset Select Menu
- Mic Gain
- Sidetone
- Mic Noise Gate
- Hot Mic
- Talk/Listen LED Buttons
- Front Display Brightness
- Top Display Brightness
- LCD Timeout
- Call Tally Talk
- Screen Flip
- Master Talk Switch
- Low Battery Alert
- Call Waiting Alert
- DECT Connection Alert
- Matrix Connection Alert
- Dark Mode Boot Alert
- Key Clicks Alert
- Alerts Levels
- Key Assignments
- Icon Help
- Scroll List
- CHAPTER 8 Access Point Overview
- AP-1800 Front Panel Description
- IPedit Requirements
- IPedit Main Window
- Configuration
- Device Name Field
- Description Field
- Version Field
- IP Address Field
- Netmask Field
- Gateway Address Field
- DNS Server Field
- Domain Name Field
- MAC Address Field
- Use Static IP Settings Check Box
- Disable RSTP Check Box
- Type Field
- Status Field
- Sessions Field
- AP Channels Field
- BP Channels Field
- Sync Display Box
- System ID Field
- PIN Field
- Zone Drop Down Menu
- CODEC Drop Down Menu
- AP ID Number Field
- Sync Master Check Box
- Intercom Alpha Field
- Channel Description Field
- Destination Type Drop Down Menu
- Destination Device Name Field (OMNEO devices and AP-1800 ROAMEO Access Point Only)
- Destination IP Address Field
- Destination Description Field
- Destination Channel Drop Down Menu
- Destination Channel Description Field
- Receiver Latency Field
- DECT BPID
- DECT Zone Selection Field
- Configuration
- CHAPTER 9 Maintenance
- CHAPTER 10 Troubleshooting, Accessories and Replacements
ROAMEO System Basic Operation 77
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
Scroll List The Scroll List menu is used to access the different scroll lists available. Scroll lists make
searching for particular key assignments easier by grouping the assignments by type.
For more information, see “Scroll List” on page 122.
Audio Setup
Aux Input Level The Aux Input Level menu is used to adjust the volume of the input audio heard in the
headset.
For more information, see“Aux Input Menu” on page 99.
Aux Override
Level
The Aux Override Level menu item is used to configure the amount to decrease the aux
volume when another call is received.
For more information, see “AUX DIM Menu” on page 99.
Max Audio
Volume Limit
The Max Audio Volume Limit menu item is used to configure the maximum output
volume allowed by the beltpack.
For more information, see “Volume Limit Menu” on page 100.
Headset Select The Headset Select menu item is used to select the headset connector being used with the
beltpack.
For more information, see “Headset Select Menu” on page 100.
Headset XLR The Headset XLR icon indicates the headset is attached to the XLR connector on the
beltpack.
For more information on how to configure the headset connection, see “Headset Select
Menu” on page 100.
Headset on Aux The Headset AUX icon indicates the headset is attached to the AUX connector on the
beltpack.
For more information on how to configure the headset connection, see “Headset Select
Menu” on page 100.
Mic Setup
Mic Gain The Mic Gain menu item is used to set the amount of gain of the headset mic.
For more information, see “Mic Gain” on page 101.
Sidetone Adjust The Sidetone Adjust menu item is used to set the level of sidetone in the headset. For more
information, see “Sidetone” on page 102.
Mic Noise Gate The Mic Noise Gate menu it is used to set the microphone activation level.
For more information, see “Mic Noise Gate” on page 102.
Hot Mic The Hot Mic menu item is used to turn the Hot Mic function on or off.
For more information, see “Hot Mic” on page 103.
Table 4: Icon Descriptions
Icon Icon Name Description