User's Manual

ROAMEO System Installation 71
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
NOTE: The PIN number default is all zeroes.
7. Using the UP and DOWN buttons, change the first PIN digit field.
NOTE: The SELECT button advances the focus to the next field. The MENU button goes back one field.
8. Press the SELECT button.
The focus moves to the next field.
9. Repeat step 7 and step 8 until the PIN is entered.
10. After entering the four digit PIN, press the SELECT button.
The beltpack/access point subscription process begins. This process can last several seconds.
• If the subscription is successful, the beltpack displays the main operating screen.
• If the subscription is unsuccessful, an appropriate error message is displayed.
IMPORTANT: Once a beltpack is subscribed it requests a startup packet from the digital matrix. Beltpack subscription
is only required for new beltpacks, or when making changes to the intercom system. A subscribed
beltpack can be turned off and on, its battery changed, etc. without re-subscribing.
On power-up, a subscribed beltpack displays a splash screen, and then switches to the main operating
screen. It may take several minutes (depending on the size of the system) to download the start-up
packets from the digital matrix. Once downloaded, the talk/listen icons on the screen are populated with
key assignments.