User's Manual
Table Of Contents
- ROAMEO Family Wireless Intercom System
- •TR-1800 •AP-1800
- CHAPTER 1 Certification Information
- CHAPTER 2 Introduction
- CHAPTER 3 System Overview
- CHAPTER 4 Site Survey
- CHAPTER 5 Installation
- CHAPTER 6 Basic Operation
- CHAPTER 7 Beltpack Overview
- System Quick Start
- Button Operation – Common
- Menu Structure – Main Menu Access
- Aux Input Menu
- AUX DIM Menu
- Volume Limit Menu
- Headset Select Menu
- Mic Gain
- Sidetone
- Mic Noise Gate
- Hot Mic
- Talk/Listen LED Buttons
- Front Display Brightness
- Top Display Brightness
- LCD Timeout
- Call Tally Talk
- Screen Flip
- Master Talk Switch
- Low Battery Alert
- Call Waiting Alert
- DECT Connection Alert
- Matrix Connection Alert
- Dark Mode Boot Alert
- Key Clicks Alert
- Alerts Levels
- Key Assignments
- Icon Help
- Scroll List
- CHAPTER 8 Access Point Overview
- AP-1800 Front Panel Description
- IPedit Requirements
- IPedit Main Window
- Configuration
- Device Name Field
- Description Field
- Version Field
- IP Address Field
- Netmask Field
- Gateway Address Field
- DNS Server Field
- Domain Name Field
- MAC Address Field
- Use Static IP Settings Check Box
- Disable RSTP Check Box
- Type Field
- Status Field
- Sessions Field
- AP Channels Field
- BP Channels Field
- Sync Display Box
- System ID Field
- PIN Field
- Zone Drop Down Menu
- CODEC Drop Down Menu
- AP ID Number Field
- Sync Master Check Box
- Intercom Alpha Field
- Channel Description Field
- Destination Type Drop Down Menu
- Destination Device Name Field (OMNEO devices and AP-1800 ROAMEO Access Point Only)
- Destination IP Address Field
- Destination Description Field
- Destination Channel Drop Down Menu
- Destination Channel Description Field
- Receiver Latency Field
- DECT BPID
- DECT Zone Selection Field
- Configuration
- CHAPTER 9 Maintenance
- CHAPTER 10 Troubleshooting, Accessories and Replacements
66 Installation ROAMEO System
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
First Time Operation – Beltpack
Battery Charge
Charging the battery for the TR-1800 beltpack can be done two different ways.
• Quick Charge Charging via the CHG-240 4-bay battery charger
• In-Device Charging
Quick Charge
Charging the battery in the 4-bay quick charger requires about 2.5 hours to completely charge a fully discharged battery. Once
charging is complete, the batteries may be left on the charger indefinitely.
4-Bay LED Charge Status Description
In addition to the power light, the 4-bay charger has two LED indicator lights to notify of the charging status.
The following LED indicators include:
Solid Yellow Charging in progress
Flashing Yellow Analyzing Battery / Fault detected
Solid Green Charging is complete
To quick charge the batteries, do the following:
1. Ensure the TR-1800 is powered off and remove the battery. See “Battery Installation and Removal” on page 68.
2. Plug the 4-bay battery charger into a standard AC wall outlet.
3. Insert the battery into one of the battery slots on the charger.
The LED in front of the battery slot indicates the charge status.
4-Bay
Quick Charge
Charger
LED
Indicators