User's Manual

56 Installation ROAMEO System
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
AP-1800 Mounting Surfaces
The ROAMEO AP-1800 Access Point can be mounted to many different surfaces. Using Table 2, determine the proper
mounting surface and mounting materials needed.
TABLE 2. Mounting Surfaces and Materials
Mounting Surface Materials Used Qty
Drywall
Drywall screws 4
Drywall anchors (as needed) 4
1/4-inch (max.) Flat washer (as needed) 4
Concrete
1/4-inch (max.) Concrete screws 4
Concrete anchors (as needed) 4
1/4-inch (max.)Flat washer (as needed) 4
Wood
1/4-inch (max.) Wood Screws 4
1/4-inch (max.) Flat washer (as needed) 4
Metal Surface
1/4-inch (max.) Sheet metal screws 4
1/4-inch (max.) Flat washer (as needed) 4
OR
1/4-inch (max.) Self-tapping or Self-drilling sheet metal screws 4
OR
1/4-inch (max.) Machine Screw 4
Machine nut or drilled and tapped holes
1/4-inch (max.) Flat washer (as needed) 4
Rack Frame
10-32 Rackmount Screws 2 to 4
1/4-inch (max.) Flat washer (as needed) 2 to 4
OR
10-32 Truss Head Rackmount Screws 2 to 4
Building Structure Member (roof trusses, etc)
1/4-inch (max.) U-bolts 4
1/4-inch (max.) Flat washers 4
1/4-inch (max.) Machine nuts 4
OR
See Metal Surface Mounting