User's Manual

ROAMEO System Site Survey 45
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
3. Using the up and down arrow buttons, navigate to the System Setup icon.
4. Press the Select button.
The Subscription Setup screen appears with the system setup icon highlighted.
5. Press the Select button.
The Enter system ID screen appears.
NOTE: If the beltpack had been subscribed to an access point previously, the last system ID used populates the
screen. The default System ID is B2B.
6. Using the up and down buttons, enter the first character of the access point system ID.
7. Press the Select button.
The focus moves to the next character space in the system ID.
8. Repeat steps 8 and 9 until the system ID is entered completely.
9. Once the system ID is entered, press the Select button.
The Enter PIN screen appears.
10. Using the up and down buttons, enter the first digit of the access point pin number (The default is 0000).
11. Press the Select button.
The focus moves to the next character space in the system ID.
12. Repeat steps 12 and 13 until the system ID is entered completely.
The Home screen appears in the front display, the DECT connection icon and the RSSI indication icon become
active.