User's Manual

ROAMEO System Site Survey 43
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
8. Click the Properties button.
The Internet Protocol Version 4 (TCP/IPv4) Properties window appears.
9. Select the Use the following IP Address check box.
The IP fields become active.
10. In the IP Address: field, enter 169.254.0.1.
11. In the Subnet mask: field, enter 255.255.0.0.
12. Click the OK button to exit the Internet Protocol Properties window.
13. Click the Close button to exit the Local Area Connection Properties window.
Add the Access Point to IPedit
To add the access point to IPedit, do the following:
1. Power on the access point.
When the power light turns solid green, the access point is ready.
2. Open IPedit.