User's Manual
Table Of Contents
- ROAMEO Family Wireless Intercom System
- •TR-1800 •AP-1800
- CHAPTER 1 Certification Information
- CHAPTER 2 Introduction
- CHAPTER 3 System Overview
- CHAPTER 4 Site Survey
- CHAPTER 5 Installation
- CHAPTER 6 Basic Operation
- CHAPTER 7 Beltpack Overview
- System Quick Start
- Button Operation – Common
- Menu Structure – Main Menu Access
- Aux Input Menu
- AUX DIM Menu
- Volume Limit Menu
- Headset Select Menu
- Mic Gain
- Sidetone
- Mic Noise Gate
- Hot Mic
- Talk/Listen LED Buttons
- Front Display Brightness
- Top Display Brightness
- LCD Timeout
- Call Tally Talk
- Screen Flip
- Master Talk Switch
- Low Battery Alert
- Call Waiting Alert
- DECT Connection Alert
- Matrix Connection Alert
- Dark Mode Boot Alert
- Key Clicks Alert
- Alerts Levels
- Key Assignments
- Icon Help
- Scroll List
- CHAPTER 8 Access Point Overview
- AP-1800 Front Panel Description
- IPedit Requirements
- IPedit Main Window
- Configuration
- Device Name Field
- Description Field
- Version Field
- IP Address Field
- Netmask Field
- Gateway Address Field
- DNS Server Field
- Domain Name Field
- MAC Address Field
- Use Static IP Settings Check Box
- Disable RSTP Check Box
- Type Field
- Status Field
- Sessions Field
- AP Channels Field
- BP Channels Field
- Sync Display Box
- System ID Field
- PIN Field
- Zone Drop Down Menu
- CODEC Drop Down Menu
- AP ID Number Field
- Sync Master Check Box
- Intercom Alpha Field
- Channel Description Field
- Destination Type Drop Down Menu
- Destination Device Name Field (OMNEO devices and AP-1800 ROAMEO Access Point Only)
- Destination IP Address Field
- Destination Description Field
- Destination Channel Drop Down Menu
- Destination Channel Description Field
- Receiver Latency Field
- DECT BPID
- DECT Zone Selection Field
- Configuration
- CHAPTER 9 Maintenance
- CHAPTER 10 Troubleshooting, Accessories and Replacements
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
CHAPTER 2
Introduction
General Description
The RTS ROAMEO system is an integrated digital wireless communications system consisting of beltpacks (TR-1800) and
access points (AP-1800) communicating over DECT
1
. Communication between access points and the Matrix uses OMNEO
technology, the Dante-based platform for high-quality audio over IP.
DECT is a license-free standard, currently accepted in more than 80 countries worldwide.
A large continuous radio coverage area can be created easily by strategic placement of access points. Beltpack users can roam
freely within the coverage area without worry of losing communication.
ROAMEO uses a standard IP infrastructure as a backbone, RTS recommends the exclusive use of managed switches through
the IP network.
Each TR-1800 ROAMEO beltpack is fully addressable and is conveniently programmed using the same software used in RTS
wired keypanels.
Features
• Provides reliable, low latency communications between beltpacks and Matrix.
• Provides roaming ability between access point locations with seamless communication.
• User-selectable CODEC to allow the best audio quality or narrowband audio quality with double the
number of users.
• Uses DECT for RF path, a globally-accepted, license-free standard.
• Ethernet backbone communications can be routed over existing LAN or WAN.
• The beltpack provides a USB port for software upgrades and the download of custom front display
graphics on boot.
• Easy battery removal for bulk charging in a 4-bay battery charger or in-device charging.
• Large color screen with easily recognizable icons for easy configuration and setup, and a smaller call
waiting window located on top of the unit.
•
Designed with four (4) independent talk/listen keys for full-duplex communications, CWW (Call
Waiting Window) functionality and one (1) XLR connector and one (1) 3.5mm connector for headset
connections.
• Site Survey feature facilitates initial placement of access points for optimal performance.
1. Digital Enhanced Cordless Telecommunications