User's Manual

ROAMEO System Maintenance 147
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
Beltpack Reset
Factory Reset
Factory Reset sets the beltpack back to factory defaults as well as resetting the subscription record. So the beltpack will need
to be re-subscribed back to its home AP if a factory reset is done.
IMPORTANT: After a factory reset, the beltpack is still subscribed to its current Home AP until it is re-powered.
To perform a Factory Reset, do the following:
1. Press and hold the MENU + SELECT + UP + DOWN buttons simultaneously.
A reset arrow pop-up window appears in the front display screen.
2. Continue pressing the MENU + SELECT + UP + DOWN buttons until the reset arrow pop-up window disappears.
3. Release the buttons.
All beltpack parameters are reset.
Settings Reset
Settings Reset puts the beltpack back to factory defaults, but the subscription record is retained.
To perform a Settings Reset, do the following:
1. Press and hold the MENU button as the unit is booted.
2. Once the Home screen appears, release the MENU button.
The beltpack boots to the home screen. All parameters, except subscription are reset.