User's Manual

ROAMEO System Maintenance 139
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
IP Address of the Home Access Point Changes
To change the IP Address of the home access point, do the following:
NOTE: These instructions are only used with systems using static IP Addresses.
1. From the left navigation panel in IPedit, select the Access Point to change the IP Address.
The Device Information panel populates with the access points configuration information.
2. In the IP Address field, change the IP Address.
The IP Address field turns yellow.
NOTE: The Use Static IP Settings check box may need to be selected based on previous configurations.