User's Manual

138 Maintenance ROAMEO System
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
10. Select the firmware image desired.
11. Click the Start button.
The upload begins showing a progression status bar.
Once the upload is done, Finished appears in the Status column.
IMPORTANT: Never disconnect the access point from the network during the update.
Once the Firmware Update Tool displays the firmware update is finished, it may be several minutes
before the access point is available for use.
Create a System– Single Access Point
IMPORTANT: Administrator rights are needed to create a system in IPedit.
To create a single access point system, do the following:
Step 1 Configure the Access Point to the OMI, see “Connecting the Access Point to the Intercom” on page 59.
Step 2 Using IP edit, configure the System ID, PIN number, etc, see “Configure the Beltpack to its Home AP-
1800” on page 65.
Step 3 Set the access point to be a Sync Master.
Create a System– Multiple Access Point
To create a system of multiple access points, do the following:
Step 1 Configure each Access Point to the same OMI, see “Connecting the Access Point to the Intercom” on
page 59.
Step 2 Using IPedit configure each access point to have the same System ID, “Configure the AP-1800 in IPedit” on
page 62.
Step 3 Set one access point as the Sync Master.
Step 4 If applicable, assign different zones to the different access points
Replace an Existing Access Point
IMPORTANT: Administrator rights are needed to replace an access point in IPedit.
To replace an existing access point, do the following:
Step 1 Configure the new AP with OMI card. with no backup.
OR
Load configuration from IPedit when he backup AP available.
Step 2 Configure the CODEC
Step 3 Reboot/Send Changes
Step 4 Configure the Sys ID, AP ID, and PIN for the new access point to match the access point being replaced.
Step 5 If applicable, configure the Sync Master check box to match the access point being replaced.
Step 6 Configure the Channels.
Step 7 Reboot/Send Changes.