User's Manual
Table Of Contents
- ROAMEO Family Wireless Intercom System
- •TR-1800 •AP-1800
- CHAPTER 1 Certification Information
- CHAPTER 2 Introduction
- CHAPTER 3 System Overview
- CHAPTER 4 Site Survey
- CHAPTER 5 Installation
- CHAPTER 6 Basic Operation
- CHAPTER 7 Beltpack Overview
- System Quick Start
- Button Operation – Common
- Menu Structure – Main Menu Access
- Aux Input Menu
- AUX DIM Menu
- Volume Limit Menu
- Headset Select Menu
- Mic Gain
- Sidetone
- Mic Noise Gate
- Hot Mic
- Talk/Listen LED Buttons
- Front Display Brightness
- Top Display Brightness
- LCD Timeout
- Call Tally Talk
- Screen Flip
- Master Talk Switch
- Low Battery Alert
- Call Waiting Alert
- DECT Connection Alert
- Matrix Connection Alert
- Dark Mode Boot Alert
- Key Clicks Alert
- Alerts Levels
- Key Assignments
- Icon Help
- Scroll List
- CHAPTER 8 Access Point Overview
- AP-1800 Front Panel Description
- IPedit Requirements
- IPedit Main Window
- Configuration
- Device Name Field
- Description Field
- Version Field
- IP Address Field
- Netmask Field
- Gateway Address Field
- DNS Server Field
- Domain Name Field
- MAC Address Field
- Use Static IP Settings Check Box
- Disable RSTP Check Box
- Type Field
- Status Field
- Sessions Field
- AP Channels Field
- BP Channels Field
- Sync Display Box
- System ID Field
- PIN Field
- Zone Drop Down Menu
- CODEC Drop Down Menu
- AP ID Number Field
- Sync Master Check Box
- Intercom Alpha Field
- Channel Description Field
- Destination Type Drop Down Menu
- Destination Device Name Field (OMNEO devices and AP-1800 ROAMEO Access Point Only)
- Destination IP Address Field
- Destination Description Field
- Destination Channel Drop Down Menu
- Destination Channel Description Field
- Receiver Latency Field
- DECT BPID
- DECT Zone Selection Field
- Configuration
- CHAPTER 9 Maintenance
- CHAPTER 10 Troubleshooting, Accessories and Replacements
ROAMEO System Access Point Overview 135
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
Channel Configuration
The Channel Configuration section is used to configure channel settings for each applicable device.
Intercom Alpha Field
The Intercom Alpha field displays the alpha (name) of the channel and the slot (in parentheses) set up in AZedit.
Channel Description Field
The Channel Description field is used to enter the channel description, if applicable. To change the description, it is
recommended to use the description field in “Channel Description Field” on page 135.
This field can contain up to 63 characters.
Destination Type Drop Down Menu
The Destination Type drop down menu is used to select the type of device to which the channel is connected.
Destination Device Name Field (OMNEO devices and AP-1800 ROAMEO Access Point Only)
The Destination Device Name field displays the name of the device to which data is transmitted.
Destination IP Address Field
The Destination IP Address field is used to enter the IP Address for the device at the other end of the connection (for
example, the Matrix to which the AP-1800 is connected.
IMPORTANT: This is an editable field. By changing the IP Address, the destination type changes if the destination
device type can be determined.
Destination Description Field
The Destination Description field displays the destination channel’s description, if applicable.
This field cannot be modified.
Destination Channel Drop Down Menu
The Destination Channel drop down menu is used to select the channel at the destination device to which the device is
connected.
TIP: When <default> is selected, the channels match 1 to 1. For example, with all the channels selected, and by
choosing <default>, Ch 1 matches to Ch 1, Ch 2 matches to Ch 2, and so on. This saves time by not having to
manually assign each channel.
Destination Channel Description Field
The Destination Channel Description field displays the destination channel’s description, if available.
This field cannot be modified.