User's Manual

132 Access Point Overview ROAMEO System
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
DECT Information Group Box
System ID Field
The System ID field is used to enter the unique system identifier for the AP-1800. Up to ten AP-1800 ROAMEO access points
can reside in the same system, sharing the same System ID.
The first time the beltpack is subscribed, the system ID is entered into the beltpack to gain access to the system. Once the
beltpack is subscribed, it has access to that system at every power up thereafter.
Any combination of the following options are available: 1 – 9, 0, A, B, C, D, E, and F.
The system default is B2B.
PIN Field
The PIN field is used to enter the four-digit PIN (Personal Identification Number) for the access point. The PIN number acts
as a level of security, allowing only beltpacks with the correct PIN number to subscribe to that access point.
The first time the beltpack is powered up, this number is entered into the beltpack to gain access to the HOME access point
(see “First Time Operation – Beltpack” on page 66). Once the beltpack is subscribed, it has access to that system at every
power up thereafter.
NOTE: If this PIN number is not entered correctly, the beltpack cannot access the HOME access point.
FIGURE 39. DECT Information