User's Manual
Table Of Contents
- ROAMEO Family Wireless Intercom System
- •TR-1800 •AP-1800
- CHAPTER 1 Certification Information
- CHAPTER 2 Introduction
- CHAPTER 3 System Overview
- CHAPTER 4 Site Survey
- CHAPTER 5 Installation
- CHAPTER 6 Basic Operation
- CHAPTER 7 Beltpack Overview
- System Quick Start
- Button Operation – Common
- Menu Structure – Main Menu Access
- Aux Input Menu
- AUX DIM Menu
- Volume Limit Menu
- Headset Select Menu
- Mic Gain
- Sidetone
- Mic Noise Gate
- Hot Mic
- Talk/Listen LED Buttons
- Front Display Brightness
- Top Display Brightness
- LCD Timeout
- Call Tally Talk
- Screen Flip
- Master Talk Switch
- Low Battery Alert
- Call Waiting Alert
- DECT Connection Alert
- Matrix Connection Alert
- Dark Mode Boot Alert
- Key Clicks Alert
- Alerts Levels
- Key Assignments
- Icon Help
- Scroll List
- CHAPTER 8 Access Point Overview
- AP-1800 Front Panel Description
- IPedit Requirements
- IPedit Main Window
- Configuration
- Device Name Field
- Description Field
- Version Field
- IP Address Field
- Netmask Field
- Gateway Address Field
- DNS Server Field
- Domain Name Field
- MAC Address Field
- Use Static IP Settings Check Box
- Disable RSTP Check Box
- Type Field
- Status Field
- Sessions Field
- AP Channels Field
- BP Channels Field
- Sync Display Box
- System ID Field
- PIN Field
- Zone Drop Down Menu
- CODEC Drop Down Menu
- AP ID Number Field
- Sync Master Check Box
- Intercom Alpha Field
- Channel Description Field
- Destination Type Drop Down Menu
- Destination Device Name Field (OMNEO devices and AP-1800 ROAMEO Access Point Only)
- Destination IP Address Field
- Destination Description Field
- Destination Channel Drop Down Menu
- Destination Channel Description Field
- Receiver Latency Field
- DECT BPID
- DECT Zone Selection Field
- Configuration
- CHAPTER 9 Maintenance
- CHAPTER 10 Troubleshooting, Accessories and Replacements
ROAMEO System Access Point Overview 129
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
Netmask Field
The Netmask field is used to display the netmask address of the selected device.
NOTE: Modification to this field can only be made when the Use Static IP Settings check box is selected.
Gateway Address Field
The Gateway Address field is used to display the gateway address of the selected device.
NOTE: Modification to this field can only be made when the Use Static IP Settings check box is selected.
DNS Server Field
The DNS Server field is used to display the address of the DNS server used by the selected device, if applicable.
NOTE: Modification to this field can only be made when the Use Static IP Settings check box is selected.
Domain Name Field
The Domain Name field is used to display the domain name of the domain the selected device is associated, if applicable.
NOTE: Modification to this field can only be made when the Use Static IP Settings check box is selected.
MAC Address Field
The MAC Address field displays the unique MAC address of the device. A MAC address is an identifier given to hardware.
No two (2) hardware devices may have the same MAC address.
NOTE: This field cannot be modified.
Use Static IP Settings Check Box
The Use Static IP Settings check box is used to enable static IP addressing. When selected, the IP Address, Netmask, and
Gateway fields become active and can be modified.
NOTE: By default, ROAMEO devices use zero configuration, in which the device automatically determines a valid IP
Address to use.
Disable RSTP Check Box
The Disable RSTP check box is used to indicate when the RSTP protocol is disabled on this device.
By default, the Disable RSTP check box is not selected.