User's Manual

120 Beltpack Overview ROAMEO System
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
To change the alpha size, do the following:
1. Using the down arrow button, select the Settings icon.
2. Press the SELECT button.
The setting menu options appear in the front display screen.
3. Using the down arrow button, select the Alpha Size icon.
4. Press the SELECT button.
A scrollable list of available sizes appear.
5. Using the up and down arrow buttons, select the size desired.
6. Press the SELECT button.
The beltpack reboots and the alphas of the beltpack is at the selected size.
NOTE: Alpha length can be set also using the AZedit application.
To set the alpha length in AZedit, do the following:
a. On the Keypanel/Ports screen, click the Edit button.
The Keypanel/Port Configuration window appears.
b. Click the Setup tab.
c. In the Type group drop down menu for Main Panel, select TR-1800/X (where X is the length of the
alpha).
• The number displayed after the TR-1800 defines the alpha length:
/4 = Four Character Alpha
/6 = Six Character Alpha
/8 = Eight Character Alpha
/8U = Eight Character Unicode Alpha
Versions
The Versions screen displays the current software versions in the beltpack.
App: Application version
Boot: Bootloader version
FIGURE 32. Alpha Size Screen