User's Manual

12 Certification Information ROAMEO System
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
Mandatory Safety Instructions to Access Point Installers and Users.
1. Use only manufacturer or dealer supplied antennas. Antenna minimum safe distance, for an access point, as set by the
FCC is 20 cm. Antenna gain: 3 dBi.
2. The FCC (Federal Communications Commission) has adopted a safety standard for human exposure to RF (Radio
Frequency) energy, which is below the OSHA (Occupational Safety and Health Administration) limits.
3. To comply with current FCC RF Exposure limits, the antenna must be installed at or exceeding the minimum safe
distance shown here, and in accordance with the requirements of the antenna manufacturer or supplier.
4. Antenna substitution: Do NOT substitute any antenna for the one supplied by or recommended by the manufacturer
or radio dealer. Substituting an antenna may expose a person or persons to harmful radio frequency radiation. Contact
the radio dealer or the manufacturer for further instructions.
WARNING: Maintain a separation distance from the antenna to person(s) of at least 20 cm.
5. As the qualified end-user of this radio device, controlling the exposure conditions of bystanders to ensure that the
minimum separation distance (above) must be maintained between the antenna and nearby persons to satisfy RF
exposure compliance.
Industry Canada
The RTS TR-1800 and AP-1800 are certified to Industry Canada RSS-213 and ICES-003.
This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two
conditions:
• This device may not cause interference, and
• This device must accept any interference, including interference that may cause undesired operation of
the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
• l'appareil ne doit pas produire de brouillage, et
• l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Industry Canada Compliance Statement . This Class B digital apparatus complies with Canadian ICES-003.
Avis de conformité à la réglementation d'Industrie Canada . Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.