User's Manual

ROAMEO System Beltpack Overview 117
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
Diagnostics
The Diagnostics screen is used to display useful information concerning the status of the beltpack. These items include the
RSSI, QF, RF Channel, and the slot of the access point to the beltpack DECT link; CAP ID and IP address of the beltpack's
HOME access point; the valid zones of the beltpack; the radio system and CODEC of the beltpack and access point and the
PMID of the access point (The current AP number plus the order that the unit was originally subscribed by the beltpack).
To open the diagnostics screen, do the following:
1. Using the DOWN arrow button, select the Settings icon.
2. Press the SELECT button.
The settings menu options appear in the beltpack display screen.
3. Using the UP and DOWN arrow buttons, select the Diagnostics icon.
4. Press the SELECT button.
The Diagnostics screen appears
Access Point To Beltpack Icon
The Access Point to Beltpack displays the connection information associated with the current access point to beltpack
connection. Some of the information included is the RSSI, QF, the carrier and the slot assignment.
Home Access Point Information
The Home Access Point Information displays the access point’s OMNEO ID (CAP6-01cXXX) and the IP Address it is
assigned for the network.
Zone Mask Information
The Zone Mask Information displays zone setting information.The left two digit number is the zone number of the beltpack.
The right two numbers indicate the zone number of the access point.
During the subscription process, the right zone number always displays FF indicating the beltpack can subscribe to all zones.
However, when the subscription is complete and the beltpack is rebooted, the beltpack can only connect to those access points
which it has zone privileges.
FIGURE 30. Diagnostics Screen