User's Manual

ROAMEO System Beltpack Overview 111
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
Dark Mode Boot Alert
The Dark Mode Boot alert is used to enable or disable an audio alert when the TR-1800 ROAMEO beltpack, that is in dark
mode, is finished booting and is ready to use or is about to shut off.
When in Dark Mode, the beltpack button LEDs, the front panel color screen, and the CWW backlight turn off, so the beltpack
is not a distraction in dark venues (for example, a theater production). Even though the CWW top panel backlight is not turned
on, the display shows it is in Dark Mode. In minimal ambient light, this message can be read, however, it may be more difficult
with no light.
When enabled,
A short low to high two-tone pitch signals the TR-1800 ROAMEO beltpack has finished booting.
A short high to low two-tone pitch signals the TR-1800 ROAMEO beltpack has shut down.
The default setting for the dark mode boot alert is enabled.
To enable/disable the dark mode boot alert, do the following:
1. Using the UP and DOWN arrow buttons, select the Alerts icon.
2. Press the SELECT button.
The alerts menu options appear in the beltpack display screen.
3. Using the UP and DOWN arrow buttons, select the dark mode boot icon.
4. Press the SELECT button.
The dark mode boot enable/disable 2-position indicator becomes active.
5. Using the UP and DOWN arrow buttons, enable the dark mode boot alert.
The 2-position indicator turns green.
OR
Using the UP and DOWN arrow buttons, disable the dark mode boot alert.
The 2-position indicator returns to the original disabled blue.
6. Once finished, press the SELECT button to save the modification.
7. Press and hold the MENU button to exit the menu.
Enabled
Disabled