User's Manual

ROAMEO System Beltpack Overview 109
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
5. Using the UP and DOWN arrow buttons, enable the low battery alert.
The 2-position indicator turns green.
OR
Using the UP and DOWN arrow buttons, disable the low battery alert.
The 2-position indicator turns blue.
6. Once finished, press the SELECT button to save the modification.
7. Press and hold the MENU button to exit the menu.
Call Waiting Alert
The Call Waiting alert is used to enable or disable the audio alert the user hears when an incoming CWW call is received.
When a call is received, four (4) short tone bursts are heard.
The default setting for the call waiting alert is enabled.
To enable/disable the call waiting alert, do the following:
1. Using the UP and DOWN arrow buttons, select the Alerts icon.
2. Press the SELECT button.
The alerts menu options appear in the beltpack display screen.
3. Using the UP and DOWN arrow buttons, select the call waiting icon.
4. Press the SELECT button.
The call waiting enable/disable 2-position indicator becomes active.
5. Using the UP and DOWN arrow buttons, enable the call waiting alert.
The 2-position indicator turns green.
OR
Using the UP and DOWN arrow buttons, disable the call waiting alert.
The 2-position indicator returns to the original disabled blue.
6. Once finished, press the SELECT button to save the modification.
7. Press and hold the MENU button to exit the menu.
DECT Connection Alert
The DECT Connection alert is used to enable or disable an audio alert when the TR-1800 ROAMEO beltpack is out of RF
range or the beltpack is powered on and no RF signal is available.
The alert heard is a short tone, repeating every three (3) seconds until the beltpack comes into RF coverage.
The default setting for the DECT connection alert is enabled.
To enable/disable the DECT connection alert, do the following:
Enabled
Disabled
Enabled
Disabled