User's Manual
Table Of Contents
- ROAMEO Family Wireless Intercom System
- •TR-1800 •AP-1800
- CHAPTER 1 Certification Information
- CHAPTER 2 Introduction
- CHAPTER 3 System Overview
- CHAPTER 4 Site Survey
- CHAPTER 5 Installation
- CHAPTER 6 Basic Operation
- CHAPTER 7 Beltpack Overview
- System Quick Start
- Button Operation – Common
- Menu Structure – Main Menu Access
- Aux Input Menu
- AUX DIM Menu
- Volume Limit Menu
- Headset Select Menu
- Mic Gain
- Sidetone
- Mic Noise Gate
- Hot Mic
- Talk/Listen LED Buttons
- Front Display Brightness
- Top Display Brightness
- LCD Timeout
- Call Tally Talk
- Screen Flip
- Master Talk Switch
- Low Battery Alert
- Call Waiting Alert
- DECT Connection Alert
- Matrix Connection Alert
- Dark Mode Boot Alert
- Key Clicks Alert
- Alerts Levels
- Key Assignments
- Icon Help
- Scroll List
- CHAPTER 8 Access Point Overview
- AP-1800 Front Panel Description
- IPedit Requirements
- IPedit Main Window
- Configuration
- Device Name Field
- Description Field
- Version Field
- IP Address Field
- Netmask Field
- Gateway Address Field
- DNS Server Field
- Domain Name Field
- MAC Address Field
- Use Static IP Settings Check Box
- Disable RSTP Check Box
- Type Field
- Status Field
- Sessions Field
- AP Channels Field
- BP Channels Field
- Sync Display Box
- System ID Field
- PIN Field
- Zone Drop Down Menu
- CODEC Drop Down Menu
- AP ID Number Field
- Sync Master Check Box
- Intercom Alpha Field
- Channel Description Field
- Destination Type Drop Down Menu
- Destination Device Name Field (OMNEO devices and AP-1800 ROAMEO Access Point Only)
- Destination IP Address Field
- Destination Description Field
- Destination Channel Drop Down Menu
- Destination Channel Description Field
- Receiver Latency Field
- DECT BPID
- DECT Zone Selection Field
- Configuration
- CHAPTER 9 Maintenance
- CHAPTER 10 Troubleshooting, Accessories and Replacements
108 Beltpack Overview ROAMEO System
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
Alerts
The Alerts menu is used to enable or disable an audible alert that signals the user when certain milestones have occurred;
these are Low Battery, Call Waiting, DECT Connection, Matrix Connection, Dark Mode Boot Alert, and Button Clicks. A
home screen icon for some of these alerts is present.
Low Battery Alert
The Low Battery alert is used to enable or disable an audio alert when the TR-1800 ROAMEO beltpack has a low battery.
The beltpack signals the user with an audio alert.
The alert heard is three (3) short bursts of tone, then a short pause, and then an additional three (3) short bursts of tone.
The audio alert is heard at the following times:
On power up, when the battery is at 10% battery life or lower.
Alarm sounds every 10 minutes when the battery percentage is lower than 10%
Alarm sounds every 5 minutes when the battery percentage is lower the 5%, but higher than 2.5%
Alarm sounds every 1 minute when the battery percentage is lower than 2.5%
The default setting for the low battery alert is enabled.
To enable/disable the low battery alert, do the following:
1. Using the UP and DOWN arrow buttons, select the Alerts icon.
2. Press the SELECT button.
The alerts menu options appear in the beltpack display screen.
3. Using the UP and DOWN arrow buttons, select the low battery icon.
4. Press the SELECT button.
The low battery enable/disable 2-position indicator becomes active.
FIGURE 25. Alerts Settings
Enabled
Disabled