User's Manual

106 Beltpack Overview ROAMEO System
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
Call Tally Talk
The Call Tally Talk is used to indicate incoming calls with blinking key buttons and alpha assignments.
Available options for this menu item are:
Off
On (default) If On is selected, when a caller activates a call, a tally appears for 10 seconds on the receiving beltpack. If
the call is answered before the minimum duration is met, the tally is cancelled.
Indefinite If indefinite is selected and a caller activates a call, the tally continues until the caller releases the key or the
call is answered.
1. Using the UP and DOWN arrow buttons, select the brightness icon.
2. Press the SELECT button.
The brightness menu options appear in the beltpack display screen.
3. Using the UP and DOWN arrow buttons, select the call tally talk icon.
4. Press the SELECT button.
The screen flip enable/disable 2-position indicator becomes active.
5. Using the UP and DOWN arrow buttons, enable call tally talk.
The 2-position indicator turns green.
OR
Using the UP and DOWN arrow buttons, disable call tally talk.
The 2-position indicator returns to the original disabled blue.
6. Once finished, press the SELECT button to save the modification.
7. Press and hold the MENU button to exit the menu.
The front display screen’s orientation is flipped.
Screen Flip
The Screen Flip menu item is used to flip the front display orientation vertically to accommodate for wearing the beltpack on
a belt. This means the beltpack does not need to be removed to read the display.
There are two ways to set the screen flip:
• On the front of the beltpack in the page change list
• In the brightness menu
To flip the display screen from the front display, do the following:
1. Using the UP and DOWN arrow buttons, scroll through the pages to the arrow icon.
The page scroll icon starts to blink.
2. Press the SELECT button.
The screen orientation flips vertically.
To flip the screen from the beltpack menu, do the following:
1. Using the UP and DOWN arrow buttons, select the brightness icon.
2. Press the SELECT button.
The brightness menu options appear in the beltpack display screen.
3. Using the UP and DOWN arrow buttons, select the screen flip icon.
4. Press the SELECT button.
The screen flip enable/disable 2-position indicator becomes active.