User's Manual

ROAMEO System Beltpack Overview 105
Bosch Security Systems, Inc.
Technical Manual
F.01U.306.750
Rev. 01
Top Display Brightness
The Top Display Brightness menu is used to adjust the brightness of the top display on the TR-1800 ROAMEO beltpack.
Brightness ranges from 0% to 100%.
By default, the Top Display brightness is set at 20%.
To configure the top display brightness, do the following:
1. Using the UP and DOWN arrow buttons, select the Brightness icon.
2. Press the SELECT button.
The brightness setting options appear in the beltpack display screen.
3. Using the UP and DOWN arrow buttons, select the top display brightness icon.
4. Press the SELECT button.
The brightness adjustment slider becomes active.
5. Using the UP and DOWN arrow buttons, adjust the top display brightness, as needed.
6. Once finished, press the SELECT button to save the modification.
7. Press and hold the MENU button to exit the menu.
LCD Timeout
The LCD Timeout menu is used to set the amount of time, in seconds, the color front display is active before the screen goes
blank.
The range for this field is 5 s – 180 s, and Inf. (infinite)
The default for this field is 30 s.
To set the LCD Timeout, do the following:
1. Using the UP and DOWN arrow buttons, select the Brightness icon.
2. Press the SELECT button.
The brightness setting options appear in the beltpack display screen.
3. Using the UP and DOWN arrow buttons, select the LCD Timeout icon.
4. Press the SELECT button.
The LCD timeout adjustment slider becomes active.
5. Using the UP and DOWN arrow buttons, adjust the LCD timeout, as needed.
6. Once finished, press the SELECT button to save the modification.
7. Press and hold the MENU button to exit the menu.