User's Manual

BTR-700 Users Manual Page 3
Frequency Stability……………………0.005%
Modulation Limiter……………………..Peak-Responding Compressor
Audio Frequency Response………..200 Hz to 10 KHz Nominal.
Microphone Input Level……………..7.75 mV for 40 KHz Deviation.
Receiver:
Frequency Range……………………. 614 to746 MHz.
(within 3 TV Channels, 18 MHz Blocks)
RF Channels, four, frequency agile, 25 KHz steps.
Sensitivity………………………. 0.8 uV for 12 dB SINAD
Squelch (internal)……………………Open at 20 dB SINAD.
Modulation Acceptance………………40 KHz Nominal.
Audio Frequency Response…………..200 Hz to 10 KHz Nominal.
Audio Output (local headset)…………..200 mW, 600 Ohm Load.
Intercom:
One intercom XLR Loop-Thru and a 4 Wire “RJ11” Loop-Thru wire
connection is available. The user can select either 2 wire or 4 wire (but not
both) from the front panel. The input and output levels are independently
adjustable from the front panel. An Auxiliary XLR Input and XLR Output is
also available.
Local Headset:
A 4 wire XLR connector is located on the front panel with Headset Volume,
Microphone Gain Control, and Press to Talk/Lock to Talk switch.