User's Manual Part 2
Table Of Contents
- Section 2 - Central Devices
- 10 DCN-WCCU Wireless Central Control Unit
- 11 DCN-WAP Wireless Access Point
- 12 System configuration
- 13 System operation
- Section 3 - Contribution Devices
- 14 DCN-WDU Wireless Discussion Units
- 15 DCN-MICL, DCN-MICS Pluggable Microphones
- 16 DCN-WLIION Battery Pack
- 17 DCN-WCH05 Battery Charger
- 18 DCN-WPS Power Supply Adapter
- 19 DCN-DDI Dual Delegate Interface
- 20 DCN-WFCD10 Flight Case for Wireless Discussion Units
- 21 DCN-WFCCU Flight Case for DCN-WCCU and DCN-WAP
- Section 4 - Appendices
Bosch Security Systems | 2007-02 | 9922 141 70691 en
DCN Wireless | Installation and User Instructions | Contribution Devices en | 96
17.4.2 Loop-through socket
With the loop-through socket, you can connect battery
chargers in series.
• If the power supply is 100 - 127 V(AC), 50 - 60 Hz,
you can connect a maximum of 5 battery chargers in
series.
• If the power supply is 220 - 240 V(AC), 50 - 60 Hz,
you can connect a maximum of 10 battery chargers
in series.
17.5 Ope rat i on
The higher the capacity, the higher the number of
charge level LEDs that come on (refer to table 16.4).
figure 17.6: Loop-through socket
Note
The accuracy of the battery capacity in table
16.4 is plus or minus 20%.
table 17.2: Charge level LEDs
No. LEDs on Battery capacity (hours)
518 - 20
4 13 - 18
38 - 13
2 3 - 8
1< 3