User's Manual Part 2
Table Of Contents
- Section 2 - Central Devices
- 10 DCN-WCCU Wireless Central Control Unit
- 11 DCN-WAP Wireless Access Point
- 12 System configuration
- 13 System operation
- Section 3 - Contribution Devices
- 14 DCN-WDU Wireless Discussion Units
- 15 DCN-MICL, DCN-MICS Pluggable Microphones
- 16 DCN-WLIION Battery Pack
- 17 DCN-WCH05 Battery Charger
- 18 DCN-WPS Power Supply Adapter
- 19 DCN-DDI Dual Delegate Interface
- 20 DCN-WFCD10 Flight Case for Wireless Discussion Units
- 21 DCN-WFCCU Flight Case for DCN-WCCU and DCN-WAP
- Section 4 - Appendices
Bosch Security Systems | 2007-02 | 9922 141 70691 en
DCN Wireless | Installation and User Instructions | Central Devices en | 52
6 Turn the knob to move the cursor to the parameter
that is shown.
7 On the parameter, push the knob.
8 Turn the knob to go to Output 2.
9 Push the knob to select Output 2.
10 Turn the knob to move the cursor to the value that is
shown.
11 On the value, push the knob.
12 Turn the knob to change the value.
13 Push the knob to select the value.
14 Turn the knob to go to the main menu number.
15 Push the knob to go back to the main menu.
16 Turn the knob clockwise to go to the < Back menu
item.
17 Push the button to go to the Main menu item.
Note
In this example, the value is 0 dB. It is possible
that your display shows a different value.
Note
In this example, the knob is turned
counterclockwise to decrease the value from
0 dB to -18 dB. Turn the knob clockwise to
increase the value.