User's Manual

First use configuration
The Wireless Access Point (DCNM-WAP) includes a web interface wizard to help you with the
initial configuration of the DICENTIS Wireless Conference System.
Web browser
The DCNM-WAP web interface is compatible with and optimized for the latest version of these
web browsers:
– Internet Explorer.
– Safari.
– Firefox.
– Opera.
– Chrome.
Preconditions
– All used system devices are prepared and installed as described in the DICENTIS Wireless
Conference System installation manual. Also see System overview, page 6.
– The Wireless Access Point (DCNM-WAP) is powered on.
– On a PC/laptop, make sure Windows PC DNS‑SD is installed (DNS‑SD is supplied on the
media delivered with the DCNM-WAP).
– On any other device, make sure Apple Bonjour is installed (Download via Apple website).
Note: Apple Bonjour or DNS‑SD are not available for Android.
– When using WiFi, make sure both 2.4 GHz and 5 Ghz on your device are used to run the
browser.
How to connect the DCNM-WAP
1. To connect directly to the DCNM-WAP using WiFi:
– Use the WiFi discovery function of you PC/Tablet, and select the DICENTIS Wireless
Conference System Network Name (SSID): Bosch DICENTIS
– Enter the WPA2 key: dcnm-wap
– Wait until the connection is made.
– Open your web browser and type: http://dcnm-wap.local, in Android type: http://
172.27.2.1
2. To connect directly to the DCNM-WAP using wired:
– Open your web browser and type: http://dcnm-wap.local
Note: This is not supported on Android, because Android does not support Bonjour
and DNS-SD.
3. To connect via a network to the DCNM-WAP:
– Consult the network owner to obtain the URL or IP address of the DCNM-WAP.
4
DICENTIS First use configuration | en 7
Bosch Security Systems B.V. Configuration manual 2015.03 | V1.0 |