User's Manual

Wireless Access Point LED behavior
The LEDs on the front panel of the Wireless Access Point (DCNM-WAP) give information on the
(configuration) status of the Wireless Access Point.
A B C C B A
Figure 6.1: DCNM-WAP status LEDs
Blue (A)
Red (B) Blue (C) Description
Flashing Off Off – No DCNM-WD(E) connected yet.
– Subscription mode is off.
On Off Off – At least one DCNM-WD(E) is connected.
– Subscription mode is off.
Flashing Flashing Flashing – The DCNM-WAP is starting‑up.
On Flashing Off – DCNM-WAP software upgrade active.
On Flashing On – DCNM-WD(E)s software upgrade active.
Flashing Off On – Subscription mode is on.
– No DCNM-WD(E)s connected yet.
On Off On – Subscription mode is on.
– At least one DCNM-WD(E) is connected.
Off Flashing Off – System is in Power off mode.
Off Off Off – No DC power supply connected.
Table 6.1: Status LEDs
6
26 en | Wireless Access Point LED behavior DICENTIS
2015.03 | V1.0 | Configuration manual Bosch Security Systems B.V.