User's Manual

1. The
Wireless Access Point (DCNM-WAP) is the central device of the DICENTIS Wireless
Conference System. The Wireless Access Point is used to:
– Host a web interface for licensing, configuring and controlling the system.
– Control the system audio and routing of the audio from and to the Wireless Devices.
– Environment wireless channel scanning. The best available wireless channel will be
chosen for the system.
– Camera control. Controls the optional connected switch (10) and cameras (11).
2. AC/DC power supply adapter (supplied with the DCNM-WAP).
3. (Optional connections) Audio line input and audio line output.
4. Wireless Device (DCNM-WD) used as a single-use, dual-use or chairperson Wireless
Device, including Battery Pack and microphone (Both to be ordered separately).
– Participants can use the Wireless Device to participate in a discussion.
5. Wireless Device Extended (DCNM-WDE) used as a single-use, dual-use or chairperson
Wireless Device, extended with Near Field Communication (NFC) reader for user
identification and 4.3” capacitive touch screen, including Battery Pack and microphone
(Both to be ordered separately).
– Participants can use the Wireless Device Extended to participate in a discussion.
6. Charger (DCNM-WCH05) used to charge the Battery Packs of the Wireless Devices.
7. Tablet device:
– Used to configure and control the system via the website hosted on the DCNM-WAP.
8. PC/Laptop:
– Temporary used to license and update the systems firmware.
9. Optional DCN multimedia System Network Cable:
– Is used for powering the DCNM-WAP via the DCNM-APS and for connection to the
Ethernet.
10. Optional Ethernet network switch:
– Is used for powering (Power over Ethernet) of the DCNM-WAP and routing of the
system data via Ethernet.
11. Optional HD Conference Dome:
– Captures the video of a participant speaking.
DICENTIS System overview | en 9
Bosch Security Systems B.V. Installation Manual 2015.02 | V1.0 |