User's Manual

Maintenance
The
DICENTIS Wireless Conference System requires minimum maintenance. To ensure for
trouble‑free operation, clean and inspect the system components on a regular basis:
Cleaning
!
Caution!
Do not use alcohol, ammonia, petroleum solvents or abrasive cleaners to clean the system
components.
1. Clean the Wireless Devices with a soft cloth moistened very slightly with a weak soap and
water solution.
2. Clean the touch screen of the Wireless Devices with a dry soft cloth.
3. Wait until the Wireless Devices are fully dry before reconnecting them to the system
cabling.
4. Clean the Wireless Access Point and Charger with a dry soft cloth, as required.
Inspect components
1.
Check all DICENTIS Wireless Conference System components for signs of wear and tear.
Replacement products can be ordered from your Bosch representative, if required.
2. Check the Wireless Devices microphone buttons for correct operation. They should not
be loose or stick when operated.
3. Check all connectors of the Wireless Access Point and system cabling for damage.
4. Check the functionality of, and charge, the Wireless Devices Battery Packs on a regular
base.
5. Check the functionality of the Charger on a regular base.
Service
If a defect cannot be resolved, please contact your supplier or system integrator, or contact
your Bosch representative directly.
8
8.1
8.2
8.3
32 en | Maintenance DICENTIS
2015.02 | V1.0 | Installation Manual Bosch Security Systems B.V.