User's Manual

Install/remove the Battery Pack
1.
Install the Battery Pack until it locks in the Charger, as illustrated in the next figure.
– Remove the Battery Pack in the reversed order by gently take‑out the Battery Pack.
2. Connect the mains power supply to the Charger to power on the Charger and to start the
charging process.
– Power LED (4) is on when receiving mains power supply.
– See the charging level LEDs (3) which indicate the charging level of the Battery Pack.
34
Figure 6.8: Placing of the Battery Pack
Charging time
– The typical charging time of one Battery Pack is 3 hours.
– The LEDs (3) showing the charging level of the Battery Pack.
– Remove the Battery Pack as soon it is fully charged (All LEDs (3) are on).
30 en | Installation Wireless Devices and Accessories DICENTIS
2015.02 | V1.0 | Installation Manual Bosch Security Systems B.V.