User's Manual
Table Of Contents
When installing more than one Charger next to each other, be sure that:
–
The vertical distance between two brackets is at least 340 mm (refer to d1 in the next
figure).
– The horizontal distance between two brackets is at least 195 mm (refer to d2 in the next
figure).
d
2
d
1
Mains power supply connection / loop‑through
1.
Connect a locally approved mains power cord to the Charger mains power supply socket/
inlet (5).
2. With the loop‑through mains power supply socket (6), you can loop‑through chargers:
– If the mains power supply is 100‑127 V(AC), 50/60 Hz, a maximum of 2 chargers can
be looped‑through.
– If the mains power supply is 220‑240 V(AC), 50/60 Hz, a maximum of 5 chargers can
be looped‑through.
DICENTIS Installation Wireless Devices and Accessories | en 29
Bosch Security Systems B.V. Installation Manual 2015.02 | V1.0 |