User's Manual

Voting screens
Background information (secretary or clerk)
Different types of voting are available:
– Basic voting
– Prepared voting
– Prepared voting with attendance registration
The system will use one of these voting methods depending on the installed licenses and
system configuration.
Basic voting will be used when:
– DCNM‑LSVT device voting licenses are activated.
– the voting function has been assigned to licensed seats in the Meeting application. For
more information, refer to the section: Meeting application > Configure > Seats and
Devices in the ‘Software Manual’.
Note: Basic voting screens do not have a subject and description displayed on the multimedia
device; the voting results are not stored.
Prepared voting will be used when:
– all requirements of basic voting are met.
– the licenses DCNM‑LMPM, DCNM‑LPD, as well as the DCNM‑LVPM system voting license,
are activated.
– one or voting rounds have been prepared in the meeting application.
For more information, refer to the section Meeting application > prepare > Voting round
details in the ‘Software Manual’.
– a meeting is activated and open.
Note: Prepared voting screens have a subject and description displayed on the multimedia
device; the voting results are stored. If you want to display individual results, the DCNM-LPD
license is required.
Prepared voting with attendance registration will be used when:
– all requirements of prepared voting are met.
– the DCNM‑LSID identification at seat license is activated.
– an identification method is configured for the meeting (see Identification/authentication,
page 21).
4.2.6
16 en | Multimedia Device DCN multimedia
2016.03 | V1.5_01 | User manual Bosch Security Systems B.V.