User's Manual Part 1

Table of contents
1
Safety 4
2
About this manual 5
2.1 Intended audience 5
2.2 Alerts and notice signs 5
2.3 Copyright and disclaimer 5
2.4 Document history 6
3
System installation overview 7
3.1 Typical system setup 8
3.2 System extension 10
4
System installation design and planning 14
4.1 System capabilities 14
4.2 Hardware requirements 16
4.3 Power supply capacity calculation plan 17
4.3.1 Calculation using DCNM-APS(2) or DCNM-PS(2) 17
4.3.2 Calculation using PoE switches 19
4.4 Redundancy options 21
4.4.1 Redundant cabling for DCNM‑APS/DCNM‑PS units 22
4.4.2 Redundant cabling for DCNM-APS2/DCNM-PS2 units 23
4.4.3 Redundant server PC 25
5
Installation material and tools 26
5.1 System Network Cable 26
5.2 System Cable Connectors 27
5.2.1 DCNM-CBCON-I Installation Cable Connectors 28
5.2.2 DCNM-CBCON-N Network Cable Connectors 28
5.3 DCNM-CBTK System Network Cable Toolkit 29
5.4 DCNM-CB250 System Installation Cable 30
6
Mechanical installation of Central Equipment 31
6.1 Audio Powering Switch and Powering Switch 31
7
Mechanical installation of Contribution Devices 34
7.1 DICENTIS devices 34
7.2 DICENTIS Microphones 38
7.3 DCNM-MMDSP Anti-reflection foil 40
7.4 DCNM-NCH Name Card Holder 40
8
Installation Test 41
DICENTIS Table of Contents | en 3
Bosch Security Systems B.V. Hardware Installation Manual 2016.07 | V1.4 |