User Manual

7
Package Contents
PoE Injector 12V Power Supply 7’ Cat5 Cable
Telex CPE Angle Bracket Hardware pack
CD & Quick Guide
Tools and Hardware Needed:
The following tools will be needed to assemble and mount your wireless CPE:
7/16” nut driver or wrench
5/16” nut driver or wrench
3/4” wrench or adjustable wrench for grommet nut
UV-stable plastic cable ties or black electricians tape
Mast pipe or DSS dish mount on which to mount the CPE
Adequate length of exterior CAT-5 cable
RJ45 plugs and crimping tool