User's Manual

Features

• An All-in-One Wireless Solution for any Ethernet-Ready Network Device

• Easy IE and Netscape Web browser configuration, no additional drivers needed

• Interoperable with 802.11b (DSSS) 2.4 GHz Equipment, Prism 2.5 based

• Up to 11 Mbps High-Speed Data Rate, Throughput up to 5.5 Mbps

• High-Power (+41 dBm EIRP) and High Sensitivity (-95 dBm @ 1 Mbps)

• 12VDC Power-over-Ethernet (PoE) supplied, up to 24VDC available

• Transient Suppression for high reliability

• Broad operating temperature, -20 to +125 F

• All nearby 802.11b access point information displayed in Wireless Scan

• Clickable association with access point within Wireless Scan

• Manual entry of ad-hoc or infrastructure mode, SSID, channel, transmission rate and

access point density available

• Selectable static IP address or DHCP client mode

• Selectable MAC address cloning

• Selectable inbound and outbound bandwidth limiting from 64 Kbps to 1500 Kbps

• Signal and noise displayed in dBm, quality displayed in %

• Tx Rate, Link quality, signal strength and noise displayed in large font in new window

for antenna aiming

• Adjustable RTS and fragmentation settings

• Up to 128 bit WEP with keys auto-generated from pass phrase

• Ability to deny unencrypted data when WEP is enabled

• Shared key authentication available when WEP is enabled

• Layer 2.5 bridging

• Changeable settings for port interface access to web server

• Support for firmware upgrades, for both interface and radio card

• Syslog client option for events logging

• Integrated 18 dBi antenna with 18 degree beam widths in both planes

• Standard multimount for DSS, mast & under eaves (fascia) mounting

• Selectable vertical or horizontal antenna polarization

• Waterproof cable entry

• Waterproof and dustproof radome enclosure

• Removable, serviceable radio area within CPE

• LED status lights visible through window on back panel