Installation Manual

Enabling and Disabling Features
Figure 5.1: Components of the transmitter
1
Dip Switch for Radio Frequency 4 Test Button
2 Battery Compartment (3V) 5 Lanyard
3 Alarm Button
Selecting Transmitter Radio Frequency
The radio frequency (RF) is set as 304 MHz by default. To change the RF to 303.825 MHz, set
dip switch 1 to the OFF position and dip switch 2 to the ON position. To change the RF to
433.42 MHz, set dip switch 1 to the ON position and dip switch 2 to the OFF position.
5
5.1
10 en | Enabling and Disabling Features ALLPLEX track Personnel Transmitter
2014.03 | V1.0.0 | DL Installation Manual Robert Bosch (SEA) Pte Ltd