Installation Manual

Appendices
Differences between hard and soft reset mode on the
coordinator/receiver
The table below lists the different configurations that were cleared when performing the hard
or soft resets.
Reset on device Settings/Features Hard Reset Soft Reset
Coordinator Name of device ✓
IP ✓
Subnet mask ✓
Gateway ✓
RF enable/disable ✓ ✓
RS485 enable/disable ✓ ✓
Internal tamper
enable/disable
✓ ✓
Fail siren enable/
disable
✓ ✓
Verbose enable/
disable
✓ ✓
Test/Engineering
settings
✓ ✓
Receiver table ✓ ✓
Receiver Host coordinator ✓ ✓
Table 7.1: Differences between hard and soft reset
7
7.1
28 en | Appendices ALLPLEX track Coordinator & Receiver
2014.03 | V1.0.0 | F.01U.277.701 Installation Guide Robert Bosch (SEA) Pte Ltd