User Manual

26
Chapter 7: Firmware Documentation
The current firmware is 1.0.2 - 1.1.1 – 1.3.8. To upgrade firmware, ensure that the AP and
attached computer are on the same subnet. In the AP Administration settings, enable “Allow
Upgrade Uploads” and SAVE. Run the Telex Locator software (available from our website or on
the supplied CD). Select the correct AP name to upgrade, then click the Upgrade button.
Choose the correct bin file, then press “Upgrade”. Upgrading will not change any settings in the
AP configuration.
1.0.2-1.1.1-1.3.8 Release Notes:
Default settings:
IP: 192.168.1.90
Access Point Name: 802.11b AP
SSID: 802.11b AP
Channel: 1
Basic Rates: all
Supported Rates: all
Transmission Rate: Automatic
Preamble: Long
Max Number of Stations: 200
Fragmentation Threshold: 2346
RTS Threshold: 2347
Beacon Period: 100 ms
DTIM Interval: 1
Multicast PM buffering: on
No WEP, no user name, no password
Visibility: Invisible
Disallow firmware upgrades
MAC filtering: off
Web Server Port: 80