User Manual

24
Chapter 5: Managing the 2480AA AP
The initial association of a CPE with the 2480AA AP must be performed at the client location.
However, once associated, both the AP and CPE settings may be monitored and changed from
any computer on their same subnet. For security reasons, it is best to keep the AP on a different
subnet from the clients.
From any remote computer on the same subnet, open the web browser and enter the AP’s IP
address as the URL. You must know the User Name and Password for this AP in order to log
in and change the settings.
Once logged-in to the AP from a wired or wireless backbone, you may change anything except
the AP’s subnet. If the backhaul link is lost, then you may only communicate with the AP after
resetting the IP address.
After you have changed the AP’s configuration, press Save then Reboot.