User Manual

Table Of Contents

12/12 Bosch Rexroth AG

DSM Series 10

RE 95132/11.08

forth in it, are the exclusive property of Bosch Rexroth AG. It may not be repro-

duced or given to third parties without its consent.

The data specified above only serve to describe the product. No statements

concerning a certain condition or suitability for a certain application can be de-

rived from our information. The information given does not release the user from

the obligation of own judgment and verification. It must be remembered that our

products are subject to a natural process of wear and aging.

Subject to change.

Bosch Rexroth AG

Hydraulics

Mobile electronics

Glockeraustraße 4

89275 Elchingen, Germany

Telephone +49 (0) 73 08 82-0

Fax +49 (0) 73 08 72 74

info.brm-ak@boschrexroth.de

www.boschrexroth.com/mobile-electronics

Safety instructions

General instructions

The suggested circuits do not imply any technical liability for the system on the part of Rexroth. –

System developments, installations and commissioning of electronic systems for controlling hydraulic drives must only be –

carried out by trained and experienced specialists who are sufficiently familiar with the components used and with the complete

system.

No components that are defective or not working properly should be used. If components fail and/or exhibit malfunction, –

repair must be carried out immediately.

Before commissioning the system, you must ensure that the vehicle and the hydraulic system are in a safe condition. –

Make certain that no persons are present in the danger zone of the machine.

A sufficiently large distance to radio systems must be maintained. –

All connectors must be unplugged from the electronics during electrical welding operations. –

Cables to the electronics must not be routed close to other power-conducting lines in the machine or vehicle. –

Conventional use

The sensor is designed for use in mobile working machines provided no limitations / restrictions are made to certain application –

areas in this data sheet.

Operation of the sensor must generally occur within the operating ranges specified and released in this data sheet, particularly –

with regard to voltage, temperature, vibration, shock and other described environmental influences.

Use outside of the specified and released boundary conditions may result in danger to life and/or cause damage to components

which could result in consequential damage to the complete system.

Damage which result from improper use and/or from unauthorized, unintended interventions in the device not described in this –

data sheet render all warranty and liability claims with respect to the manufacturer void.