User Manual

Bosch Rexroth AG
RE 95 135/06.06 HDD
3/8
Technical Data
Table of values
Type
HDD1, HDD2
Nominal voltage 12 and 24 V DC
Residual undulation (DIN 40839, Part 1)
max. ± 2 V DC
Supply voltage U
B
, absolute voltage range 8...32 V DC
Current consumption max. 33 mA at 24 V DC
Current load capacity
500 mA at 24 V and 25°C
50 mA at 24 V and 125°C
Frequency outputs 2 Hz ...6 kHz
Direction of rotation signal
clockwise high
counter-clockwise low
stationary
undefined
Short-circuit proof against Supply voltage and earth
Polarity mismatch foolproofing available
Electromagnetic compatibility
Radiated interference (Motor vehicles directive-RL95/54/EG) 100 V
eff
/m;
Line-borne interference (ISO 7637-1/-2/-3) Values on request
Load Dump
max. 70 V
Vibration resistance:
Sinusoidal vibrations (IEC 60086-2-6) 10 g / 57...2000 Hz
10 cycles per axis
Sawtooth vibrations (IEC 60086-2-36)
0,05 g
2
/ Hz
20 ...2000 Hz
Shock resistance:
Transport shock (IEC 60068-2-27) 15 g / 11 ms
3x in each direction (pos./neg.)
Continuous shocks (IEC 60068-2-29)
25 g / 6 ms
1000x in each direction (pos./neg.)
Moisture resistance 95 % (+25°C to +60°C)
Salt spray resistance DIN 50021 48 h, 35°C, 5% NaCl
Type of protection (IEC 60529) when installed and plugged-in
with core end sleeves IP 67 and IP 69 k
with DEUTSCH DT04-4P-EP04 male connector IP 69 k with mating connector
Operating temperature (IEC 68-2-14) -40°...+125°C
Storage temperature (IEC 68-2-1, IEC 68-2-2) -55°...+125°C
Case material Brass / plastic
Mass ca. 95 g
Installation position any
Measuring distance 0,3 - 1mm for module 2
Pressure resistance of measuring surface 10 bar