User Manual

Bosch Rexroth AG
RE 95143/12.08
AN2
7/8
Order designations for mating connector, comprising:
Description Quantity Material Number
Plug housing 1x 1 928 402 579*
Protective cap 1x 1 280 703 022*
Contacts 3x 929 939**
Single wire sealing
3x
828 905-1** at FLK cable type
(wire size: 0,5 – 1,0 mm
2
) 828 904-1** at FLKr, FLX cable
*: can be purchased at Bosch
**: can be purchased at AMP
The mating connector is not included in supply.
Safety Notes
• General instructions:
– The suggested circuits do not imply any technical liability for the system on the part of Rexroth.
– System developments, installations and commissioning of electronic systems for controlling hydraulic drives must only be
carried out by trained and experienced specialists who are sufficiently familiar with the components used and with the
complete system.
– No components that are defective or not working properly should be used. If components fail and/or exhibit malfunction,
repair must be carried out immediately.
– Before setting the system into operation, you must ensure that the vehicle and the hydraulic system are in a safe condition.
Make certain that no persons are present in the danger zone of the machine.
– A sufficiently large distance to radio systems must be maintained.
– All connectors must be unplugged from the electronics during electrical welding operations.
– Cables to the electronics must not be routed close to other power-conducting lines in the machine or vehicle.
• Conventional use:
– The sensor is designed for use in mobile working machines provided no limitations / restrictions are made to certain
application areas in this data sheet.
– Operation of the sensor must generally occur within the operating ranges specified and released in this data sheet,
particularly with regard to voltage, temperature, vibration, shock and other described environmental influences.
Use outside of the specified and released boundary conditions may result in danger to life and/or cause damage to
components which could result in consequential damage to the complete system.
– Damages which result from improper use and/or from unauthorized, unintended interventions in the device not described
in this data sheet render all warranty and liability claims with respect to the manufacturer void.
Mating Connector