User Manual

4/4 Bosch Rexroth AG
VS RE 95148/04.08
© This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth AG. It may not be repro-
duced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be de-
rived from our information. The information given does not release the user from
the obligation of own judgment and verification. It must be remembered that our
products are subject to a natural process of wear and aging.
Subject to change.
Bosch Rexroth AG
Hydraulics
Product Unit Mobile Electronics
Elchingen Plant
Glockeraustrasse 4
89275 Elchingen, Germany
Phone [phone]
Fax [phone]
[e-mail]
www.boschrexroth.com/mobile-electronics
Safety Instructions
General instructions:
The suggested circuits do not imply any technical liability for the system on the part of Rexroth.
System developments, installations and commissioning of electronic systems for controlling hydraulic drives must only be
carried out by trained and experienced specialists who are sufficiently familiar with the components used and with the
complete system.
No components that are defective or not working properly should be used. If components fail and/or exhibit malfunction,
repair must be carried out immediately.
Before setting the system into operation, you must ensure that the vehicle and the hydraulic system are in a safe condition.
Make certain that no persons are present in the danger zone of the machine.
A sufficiently large distance to radio systems must be maintained.
All connectors must be unplugged from the electronics during electrical welding operations.
Cables to the electronics must not be routed close to other power-conducting lines in the machine or vehicle.
Conventional use:
The sensor is designed for use in mobile working machines provided no limitations / restrictions are made to certain
application areas in this data sheet.
Operation of the sensor must generally occur within the operating ranges specified and released in this data sheet,
particularly with regard to voltage, temperature, vibration, shock and other described environmental influences.
Use outside of the specified and released boundary conditions may result in danger to life and/or cause damage to
components which could result in consequential damage to the complete system.
Damages which result from improper use and/or from unauthorized, unintended interventions in the device not described
in this data sheet render all warranty and liability claims with respect to the manufacturer void.
–
–
–
–
–
–
–
–
–
–