User Manual

2/2 Bosch Rexroth AG TSF Fluid Temperatur Sensor | RE 95180/07.08
Characteristics
1800
1200
1300
1400
1500
1600
1700
60 70 80 90 100 110
Temperature t in °C
Resistance R in Ω
Technical Data
Measurement range -30 °C ... 130 °C
Resistance at 0 °C 1000 Ω
Tolerance at 20 °C ± 0,5 K corresp. to ± 0,3 % of R
20
Tolerance at 100 °C ± 1,1 K corresp. to ± 0,5 % of R
100
Max. current allowed 5 mA
Time constant
(in standing water)
11 s
Lag time 1 s
Vibration strength 40 g
Degree of protection IP 64 A with plug connected
Plug connection Jet plug, 2-pin
Threaded socket M14x1,5
Order number:
Sensor (without accessories) _______________0 538 009 252
Accessory (connector set) _________________ 1 834 484 094
Connector set consisting of:
1x connector housing, 2x contacts, 1x protective cap
Connector set is not included in the supply!
Dimensions
© This document, as well as the data, specifications and other information
set forth in it, are the exclusive property of Bosch Rexroth AG. It may not be
reproduced or given to third parties without its consent.
The data specified above only serve to describe the product. No statements
concerning a certain condition or suitability for a certain application can be
derived from our information. The information given does not release the user
from the obligation of own judgment and verification. It must be remembered that
our products are subject to a natural process of wear and aging.
Subject to change.
Bosch Rexroth AG
Hydraulics
Mobile Electronics
Robert-Bosch-Straße 2
71701 Schwieberdingen, Germany
Phone [phone]
Fax [phone]
[e-mail]
www.boschrexroth.com/mobile-electronics
11
28
SW19
12
16,8
Ø4
Ø7,5
1,5
-0,3
-0,2
±0,5
11
±0,5
±1
52
±1
60
±0,5
-0,25
DW3869-14-FPM
Blade connector 2,8x0,8
acc. DIN 46244 without holding hole
gold plated surface 0,5 µm
tightening torque: 30 Nm