User Manual
Linear Motion and
Assembly Technologies ServicePneumaticsHydraulics
Electric Drives
and Controls
Operation
The sensor element consists of a PTC nickel-thin-film resistor,
vacuummetalized onto a ceramic base. This component is built
into a plastic housing to protect it from damage. The time con-
stant and the lag time of the sensor are maintained at minimum
levels by the lattice structure and by designing the input and
output for good flow characteristics.
Application
Monitoring temperature of ambient air and of charge air in
motor vehicles.
BODAS
Temperature Sensor for Air TSA
Data sheet
RE 95181/07.08 1/2
Replaces: 07.06