User Manual

2/6 Bosch Rexroth AG Mobile Hydraulics
CEMA CAN Expansion Module RE 95 340/11.04
Ordering Code
Type
Application Software
AS/
Software
CAN Expansion Module
CEMA
Version
10
AS/ CEMA 10
Order Information
The AS/CEMA10 application software must only be used with
the RC2-2/20 control unit and other accessories (see page 5).
When placing an order, the hardware and software type codes
should be linked by a "+".
Example: RC2-2/20+AS/CEMA10
Power
supply
Ignition lock
RC2-2 control unit
with CEMA software
BODEM
PC
software
RS232
Diagnostics
socket
BB-3
control panel
Max.
2 switch outputs
Max. 4 setpoint
sensors
Max. 8 switches
Drive motor
Variable
displacement pump
A4VG...EP or A10VG...EP
or max. 2 valve disks
RS232
Fixed displacement motor
A2FM or
A2FE or
A4FM or
A10FM
Any control unit
Max. 3 speeds
CAN Bus
How it Works
The CAN expansion module is designed to actuate a variable
displacement pump in an open or closed circuit and one or two
valve disks.
The following is an example of the hydraulic configuration used:
• An A4VG or A10VG variable displacement pump with
electro-proportional (EP) control combined with one or more
A2FM, A2FE, A4FM or A10FM fixed displacement motors