User Manual

Linear Motion and
Assembly Technologies ServicePneumaticsHydraulics
Electric Drives
and Controls
Position Foto
(oben links):
X = 147
Y = 93,9
Technical data sheet
Angle Sensor WS1
Series 10
Features
The angle sensor is used for measuring rotary movements of an
adjusting shaft or the angle positions of levers, e.g. to deter-
mine the setting of the injection pump lever of a diesel engine.
The sensor has a robust, sealed housing and an integrated
electronic system specially developed for automotive applica-
tions.
The voltage supply for the WS1 angle sensor can be delivered
directly by the control units (MC or RC).
As output variable, the WS1 angle sensor delivers a voltage
proportional to the angle of rotation.
The sensor contains two internal contact-free measuring sy-
stems with a common power supply.
For safety-related system solutions, the output signals are
partially redundant.
RE 95140/07.07 1/4
Replaces: 05.03
Main components
– Hall-effect semiconductor elements and integrated amplifiers
– Robust plastic housing with moulded plug
– Metal inner housing and line filter for high electromagnetic
compatibility (EMC)
– Guide lever with fixing hole
Special features
– Life span designed for more than 30 million cycles
– Resistant to shock and vibration
– Molded-in metal bushing for low-wear on lever arm