User manual

English | 17
Bosch Power Tools F 016 L81 730 | (23.5.17)
 Do not use 4.0 Ah battery with this power tool.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-15.
Typically the A-weighted noise levels of the product are:
Sound pressure level 67 dB(A); sound power level 87 dB(A).
Uncertainty K=3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745-2-15:
a
h
=2.5m/s
2
, K=1.5 m/s
2
.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Mounting and Operation
Initial Operation
For Your Safety
 Warning: Switch off and remove battery from machine
before adjusting or cleaning.
 The blades continue to move for a fraction of a second
after the hedgecutter is switched off.
 Do not touch the moving blades.
Battery Charging
 Do not use other battery chargers. The supplied battery
charger is designed for the Lithium-Ion battery in your gar-
den product.
 Observe the mains voltage! The voltage of the power
supply must correspond with the data given on the name-
plate of the battery charger. Battery chargers marked with
230 V can also be operated with 220 V.
The battery is equipped with temperature monitoring that al-
lows charging only in the temperature range between 0 °C
and 45 °C. In this manner, a high battery service life is
achieved.
Note: The battery supplied is partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure
does not damage the battery.
Battery Charger
AL 3640 CV
Professional
AL 3640 CV
Professional
Article number EU
UK
AU
2 607 225 099
2 607 225 101
2 607 225 103
2 607 225 099
2 607 225 101
2 607 225 103
Charging current
A4.04,0
Charging period (battery discharged)
–1.3 Ah
–2.0 Ah
min
min
(80 %) 100 %
(15) 45
(25) 45
(80 %) 100 %
(15) 45
(25) 45
Allowable charging temperature range
°C 0–45 0–45
Weight according to EPTA-Procedure 01:2014
kg 1.0 1,0
Protection class
/ II / II
Cordless hedge trimmer Advanced
HedgeCut 36
AHS 54-20 LI
* depending on the battery pack being used
Action Figure Page
Delivery Scope
1 300
Battery Charging
2 300
Inserting the battery
2 300
Battery Charge Indicator
3 300
Starting 4 301
Stopping
4 301
Working Advice
5 301
Removing the Battery
6 302
Maintenance and Cleaning
6 302
Storage and Transport
7 302
Selecting Accessories
8 302
Action Figure Page
OBJ_BUCH-948-008.book Page 17 Tuesday, May 23, 2017 3:52 PM