Installation Sheet

10
WARNING
Avoid Tip Over Hazard!
Do not use the dishwasher until it is completely installed.
When opening the door on an uninstalled dishwasher,
carefully open the door while supporting the rear of the unit.
Failure to follow this warning can result in serious injury.
LEVELING THE DISHWASHER
The unit should now be ready to slide into the cabinet
opening. To avoid scratching the floor, use floor
protection and caution when sliding the dishwasher into
the cabinet. Make sure that the hoses and cords do not
bunch up behind the unit or kink as you slide the unit
back. Make certain to slide the unit into place before
raising the leg levelers. Level the dishwasher horizontally
by turning feet clockwise to raise or counter-clockwise to
lower front of the unit. Level the dishwasher vertically by
turning center screw to raise or lower the back.
Figure 20
SECURING THE DISHWASHER
Center the dishwasher in the opening before securing
it to your cabinet or countertop as shown in Figure 21.
Remove the top cutlery rack as shown in Figure 22.
Figure 21
Figure 22
Drive the mounting screws through the holes in the
mounting brackets as shown for Top (Figure 23), Side
Mount (Figure 24) and Alternate Side Mount (Figure
25).
Figure 23
Figure 24
Figure 25