User's Manual

OEM Instruction Manual Content
Consistent with §2.909(a), the following text must be included within the user’s manual or
operator instruction guide for the final commercial product.
Operating Requirements and Conditions:
The design of WiFi/BT Module Card complies with U.S. Federal Communications Commission
(FCC) guidelines respecting safety levels of radio frequency (RF) exposure for Mobile devices.
FCC ID:
This product contains FCCID: 2AHLA-SP01500243
Note: In the case where the Host / Module combination has been re-certified the FCC ID shall
appear in the product manual as follows:
FCC ID: 2AHLA-SP01500243
Mobile Device RF Exposure Statement:
RF Exposure - This device is only authorized for use in a mobile application. At least 20 cm of
separation distance between the WiFi/BT Module Card device and the user's body must be
maintained at all times.
Caution Statement for Modifications:
CAUTION: Any changes or modifications not expressly approved by Bosch Automotive Service
Solutions could void the user’s authority to operate the equipment.
FCC Part 15 Statement (Only Include if FCC Part 15 is Required on the End Product):
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own
expense.